机电控制无级变速器执行机构动态响应特性仿真研究

为研究夹紧力可调的机电控制无级变速器（EMCVT）电控电动执行机构的可靠性，及其速比和从动带轮夹紧力动态响应的影响因素，采用MATLAB/Simulink构建了EMCVT执行机构的动力学模型，设计了针对EMCVT电控电动执行机构的速比和夹紧力闭环控制器。对EMCVT输入转矩突变和目标速比突变两种工况进行了仿真分析，仿真结果表明：速比和从动带轮夹紧力动态响应的超调量和调节时间满足CVT的使用要求，从动带轮夹紧力响应时间小于1s，速比变化率可以达到2；EMCVT速比和从动带轮夹紧力动态响应的主要影响因素是执行电动机的负载和转动方向。     

Bioavailability,rheology, and sensory evaluation of mayonnaise fortified with vitamin D encapsulated in protein-based carriers

Vitamin D lost its functionality during processing and storage, thus, encapsulation with proteins is desirable to preserve bioactivity. The aim of the current study was to develop encapsulated vitamin D fortified mayonnaise (VDFM) using whey protein isolates (WPI) and soy protein isolates (SPI) as encapsulating materials in three different formulations, that is, 10% WPI, 10% SPI, and 5/5% WPI/SPI. Increased shear stress decreased the apparent viscosity along with significant effects on the loss modulus of VDFM. WPI encapsulates showed better results as compared to SPI. WPI based VDFM (M₁) depicted the best results in terms of size and dispersion uniformity of oil droplets. Hue angle and total change differed significantly among treatments. The highest value for overall acceptability was acquired by M₃ (5:5%WPI:SPI-encapsulates) thus proceed for in vivo trials. Serum vitamin D level was significantly higher in the encapsulated VDFM rat group (58.14 ± 6.29 nmol/L) than the control (37.80 ± 4.98 nmol/L). Conclusively, WPI and SPI encapsulates have the potential to improve the stability and bioavailability of vitamin D.     

有色金属矿山工程技术项目尾款催收管理研究

依托实践经验和教训，从业务角度分析研究有色金属矿山工程技术项目尾款拖欠的形成机理和催收要点，全寿命周期探讨该类经营管理问题的解决途径，结合业务、财务、法务专业知识，提出一系列有深度可借鉴的见解及措施,如：1）催收工作要注意客户性质、客户经营情况、客户人员变化、项目完成瑕疵、乙方管理特征等具体情况采用不同的催收沟通办法；2）建议利用奖惩激励、诉前保全、信用保险、商业保理等工具达到催收或出表目的；3）提醒进行财产损失处理来结束确认不能回收项目的内部管理流程；4）提议利用履约担保、质量担保、客户分级管理等措施来控制回款风险。     

A broadband filter with two transmission zeros adopting a new design method

A new design method was proposed in this article to insert transmission zeros in the broadband filters. In this method, the coupling line was connected to a certain position on the resonator. And then the coupling strength was adjusted by the connecting position. The open end of the resonator was hung and then the cross‐coupling was introduced to realize transmission zeros. This coupling method could add an adjustable parameter to improve the freedom of design and convenient to insert the transmission zeros. To verify this method, a highly selective coupled‐line microstrip filter with two transmission zeros was designed, fabricated, and measured. The measured results were in good agreement with the simulated ones. The return and insertion losses of the broadband filter were better than 18 and 2 dB, respectively. The relative bandwidth of the filter (FBW) was more than 68%. The rectangular coefficient (30 dB:1 dB) was less than 1.21.     

Hand hygiene and surface cleaning should be paired for prevention of fomite transmission

Touching contaminated surfaces might lead to the spread of pathogens, that is, the fomite transmission route. Although hand- and surface-hygiene practices are potentially important non-pharmaceutical interventions for the fomite route, the two interventions have been mostly studied separately in the literature. In this study, we develop a new conceptual model based on the law of mass action, analyze the temporal diffusion of contaminated surfaces and hands, and verify the model with simulations in an assumed norovirus outbreak in a buffet restaurant. A quantitative hygiene criterion is developed for the required frequency of surface disinfection and hand hygiene to control the fomite transmission in indoor environments. To eliminate surface contaminations, the product of pathogen-removal rates (including hygiene and natural death) on hands and surfaces must be no smaller than that of the human hand and surface contact frequency (ie, the net removal product must be non-negative). When the net removal product is negative, the number of contaminated surfaces and hands would show a logistic growth trend and finally approach the equilibrium. Our approach sheds light into how to optimize the combined use of hand hygiene and environmental decontamination for the best effectiveness under different settings.     

用于低损耗特种玻璃熔炼的高纯致密锆英石的研制

以纯度大于99.9%(质量分数)的高纯ZrO₂和SiO₂为原料,少量TiO₂为添加剂,采用高温固相法合成高纯锆英石(ZrSiO₄)粉料。研究温度和反应时间对高纯锆英石合成效率的影响,发现粒度小于50 μm的原料粉末经1 500 ℃反应48 h后,ZrSiO₄相的含量可以达到95.77%(质量分数)。将合成的高纯锆英石粉料球磨并冷等静压成型后,在1 550 ℃高温烧结成高纯致密锆英石砖。高纯致密锆英石中杂质Fe的含量仅为29 μg/g,Cu的含量小于1 μg/g,是普通商用致密锆英石的1/10;对磷酸盐玻璃静态光吸收损耗的影响仅为普通致密锆英石材料的1/3。将这种高纯致密锆英石材料用于激光玻璃窑炉,有助于降低玻璃对1 053 nm激光的损耗,提升激光玻璃的激光性能。     

Halogenation effect promoted low bandgap polymers based on asymmetric isoindigo unit with low energy loss

To optimize the energy levels of the structural framework of isoindigo polymers, a series of asymmetric isoindigo based low bandgap polymers with chlorine, fluorine and thiazole substituents was constructed and their optical, electrochemical and photovoltaic properties were comparatively evaluated for the impact of different substitutions. In comparison with the polymer based on 2,2'‐bithiophene and isoindigo unit (PTi) with non‐substituted bithiophene as the donor moiety, the highest occupied molecular orbital energy level for the newly synthesized polymers is significantly decreased, and in turn an improvement of the open‐circuit voltage (V_OC) is noted in the corresponding photovoltaic devices. More importantly, combined with a low bandgap of 1.32 eV, the energy losses (E_loss) could be reduced to 0.61 eV for polymer based on chlorinated 2,2'‐bithiophene and isoindigo unit (PCl). In addition, the halogen moieties are observed to be superior in device fabrication and give better values than the thiazole substituent. Both fluorinated and chlorinated polymer donors exhibited improved performance compared with the original polymer PTi. Consequently, this work not only presents the influence of different electron withdrawing substituents on the physicochemical and photovoltaic performance, but also backs the concept of how to reduce the energy loss via the heteroatom effect. © 2020 Society of Chemical Industry     

Development of a fast atom beam gun for surface-activated bonding

Surface-activated bonding (SAB), also called room-temperature bonding, is used in three-dimensional integration technology for semiconductor devices. An Ar fast atom beam (FAB) is used for SAB. However, conventional FAB guns must be replaced after hundreds of minutes of irradiation because carbon abrasion powders are generated by Ar ions sputtering in the gun. Therefore, this study develops a novel FAB gun with improved lifetime. The proposed FAB gun applies magnetic fields to guide Ar ions to reduce sputtering in the gun and improve irradiation efficiency. The proposed FAB gun indicates the possibility of improving gun lifetime.     

计及损耗的双馈感应风力发电机高电压穿越控制策略

利用换向原理分析其电磁暂态特性，在此基础上，对DFIG输出无功功率与其铜损耗的解析关系进行了理论分析，推导出了使铜损耗最低的DFIG输出无功功率最优参考值。同时，转子的瞬时功率补偿分量减小了DC总线电压的波动，从而减少了转换器的功率损耗。由此，提出了考虑DFIG铜损和转换器损耗的DFIG高电压穿越控制策略。仿真结果表明，该控制策略可以在保证DFIG高电压穿越能力的同时降低DFIG铜损耗与换流器损耗，并具有较好的暂态特性。     

入口弯管对矿用轴流通风机气动性能影响的数值研究

以某大型矿用低压轴流式通风机为研究对象, 采用气体动力学性能试验和数值模拟的方法研究了不同入口弯管对风机性能的影响, 重点分析了入口弯管引起的叶轮内部流动特征和损失分布的变化规律。研究结果表明, 风机入口采用弯管连接缩短了进口管道的轴向长度, 节省了地下空间, 但同时来流的均匀性受到影响。弯管内气流速度梯度较大, 管道内侧易发生流动分离, 产生回流区, 增大了流体流动时的能量损失, 风机的整体性能下降。弯管与叶轮入口之间的连接长度会影响内部流场, 当附加直管段较长时, 来流均匀性得到提高, 风机性能有所改善。